Smallblockposse.NET    www.DotNetBoyz.Net    www.DotNetBoyz.Net  Hop To Forum Categories  Tech Questions    is this too big ?
Go
New
Find
Notify
Tools
Reply
  
-star Rating Rate It!  Login/Join 
turbolxcoupe
Street Racer
Posted
picked up a holset ht60, rebuilt it and then realized it has a counter clockwise pinwheel. then i started to think maybe it is too big for my 350. any suggestions? was told it can make around 1600 cfm.
 
Posts: 45 | Location: billings montana | Registered: Sun February 04 2007Reply With QuoteEdit or Delete MessageReport This Post
psychotexan
Street Racer
Posted Hide Post
is the 350 built if it is, i dont think it is.but thats my two cents.


1989 lincoln mark vii lsc 302ho,aod,8.8 3.27open diff.2.5" tubing to 15.5" glasspacks.
 
Posts: 53 | Location: fort worth,texas | Registered: Sun October 14 2007Reply With QuoteEdit or Delete MessageReport This Post
turbolxcoupe
Street Racer
Posted Hide Post
im currently building the new motor, forged slugs, high duration hyr. roller cam, aftermarket rods... yeah, its built for @30 psi
 
Posts: 45 | Location: billings montana | Registered: Sun February 04 2007Reply With QuoteEdit or Delete MessageReport This Post
psychotexan
Street Racer
Posted Hide Post
then it should be good .good luck bro


1989 lincoln mark vii lsc 302ho,aod,8.8 3.27open diff.2.5" tubing to 15.5" glasspacks.
 
Posts: 53 | Location: fort worth,texas | Registered: Sun October 14 2007Reply With QuoteEdit or Delete MessageReport This Post
TurboLX.
Street Racer
Posted Hide Post
whats the a/r of it?



Dont Worry, It's Only A Small Block..
 
Posts: 278 | Location: Newburgh, NY | Registered: Thu April 05 2007Reply With QuoteEdit or Delete MessageReport This Post
 Previous Topic | Next Topic powered by eve community  
 

Smallblockposse.NET    www.DotNetBoyz.Net    www.DotNetBoyz.Net  Hop To Forum Categories  Tech Questions    is this too big ?

© YourCopy 2002